Smart Solar Based Drip Irrigation-UNO

The components of solar powered intelligent drip irrigation system are shown in Fig. Soil moisture sensor is used for real-time collection of crop root soil moisture content and converting it into a signal in the range of Voltage V; and the signal will transformed as knowledge of water requirement of crop. Soil moisture content at the root zone of different crops is collected by using the soil moisture sensor. The threshold limit for the water requirement for a particular crop has been feed to system which in turn controls the operation the control system. The power needed for the operation of the control system has been met with the use of a solar panel and the display will receive the control signal and display the data stored using the sensor from the field.

Order code:RDL/DIY-DRU/14/001/V1.0

The board has only one  relay driven by TTL circuit and MCT2E IC for isolation purpose.The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control relays. Relay can switch varierty of AC or DC high voltage, high current 20A,loads working at 110V or 230V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.

Order Code : RDL/SRB/14/001/V3.0

MODBUS TCP IO Modules can be used to build a custom solution for secure monitoring and controlling the IO. Field data collection over MODBUS RS485 makes monitoring and solution integration easier than ever.

ORDER CODE: RDL870

UHF RFID Reader by RDL Technologies is designed keeping in mind about the Industrial Environment. UHF RFID Reader is designed to monitor and identify the tracks and pallets by integrating with PLC and SCADA

ORDER CODE: RDL822

GSM GPRS M95 QUECTEL Modem -RS232 is built with Quad-Band GSM GPRS engine-M95, works on frequencies 850/900/1800/1900MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as a microcontroller with RS232 Chip(MAX232). 

ORDER CODE: RDL815

LPC2148 is a single-chip 32-bit RISC Microcontroller with 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 32KB RAM having Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Two I2C serial interfaces, Two SPI serial interfaces Two 32-bit timers, Watchdog Timer, PWM unit, Real Time Clock with optional battery backup, Brown out detect circuit General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Order Code : RDL/LPB-48/14/001/V1.0

This Bluetooth Module enables you to wireless transmit & receive serial data. It is a drop in replacement for wired serial connections allowing transparent two-way data communication. You can simply use it for a serial port replacement to establish a connection between MCU or embedded project and PC for data transfer. This board operates on 5V and has LED indication and 3V regulator.

 Order Code: RDL/BLT/13/001/V1.0