The Programmable Cloud PLC offers Unmatched adaptability, reliable connectivity and customisable solution for your industry. Cloud PLC can be utilized as an edge gateway, Automation tool, data logger & edge processing node. Cloud PLC supporting wide range of industrial protocols like Modbus, MQTT, JSON, RESTful, TCP/UDP, SNMP, OPC which makes the solution integration easier than ever for IT / Automation engineers.  

ORDER CODE: RDL826

The MODBUS TCP gateway extends two way communications between the MODBUS RTU & the MODBUS TCP Network. The Gateway comes with Configuration manager that makes device configuration easier.

The MODBUS gateway fetches the Data from a variety of MODBUS Slaves- energy meters, Sensors, industrial PLC’s, and VFD through MODBUS RTU Protocol and then push to MODBUS TCP Scanner device.

ORDER CODE: RDL799

With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware..The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/PPIC/14/001/V1.0

If you are learning microcontrollers or want to quickly develop embedded solution based on standard 8051 core, this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller. With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware . The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0