Product Description
Home automation software focuses on making homes better, and often safer, through innovative technology and providing a luxurious upgrade for less than you might imagine. The world has come a long way from relying on home security provided by large corporations operating from remote locations.automation system provides comprehensive energy saving solutions to reduce your energy usage
Block Diagram:
Connection Diagram:
RDL- UNO ATMEGA328 Development Board 3 in 1 Features:
- Atmega328p- controller
- Standard I/O interface for UNO shield.
- Xbee foot print for RF/WiFi communication.
- Inbuilt Micro SD memory card slot for Data logging application.
- Programmable with Arduino open source.
- High quality PCB FR4 Grade with FPT Certified.
- For more details: RDL- UNO ATMEGA328 Development Board
FT232 BreakOut Board Features:
- Simple and convenient design for the hobbyist and developers.
- High speed bridge converting USB to Serial, serial to USB.
- High quality PCB FR4 Grade with FPT Certified.
- For more details: FT232 BreakOut Board
Serial 3 Channel AC 230V SSR and Dimmer Features:
- Works on AC power supply 230V.
- Load Capacity 12 Amp AC(Up to 2000 Watt)
- Isolated from mains power
- Works from any microcontroller input
- Serial Control (TTL).
- Simultaneous 3 load control with 0-100% dimming.
- Act as 3 channel solid state relay with ON/OFF and dimming.
- Optional input for Microcontroller or Bluetooth inteface pin TX,RX,5V,GND.
- Application software source code should be provided.\
- High quality PCB FR4 Grade with FPT Certified.
- For more details: Serial 3 Channel AC 230V SSR and Dimmer
4 Relay Interfacing Board 12V Features:
- LED indication for relay & power supply.
- Design based on highly proven IC ULN2803 as driver.
- Direct input 5V microcontroller for relay control.
- High Current (8A) Capability.
- AC or DC Operating Voltages.
- No Leakage Current.
- Eliminates costly isolation relays and wiring.
- High quality PCB FR4 Grade with FPT Certified.
- For more details: 4 Relay Interfacing Board 12V
Xbee USB Adapter with FT232RL Features:
- 3.3V and 5V dual power output
- 3.3V and 5V IO compatible
- USB 2.0 protocol
- Needs no external crystal.
- Router and co-ordintaor indicator led.
- On board reset button.
- LED indicators for RX,TX,PWR and ASSOC signals.
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- Power Supply USB 5V.
- Single chip USB to asynchronous serial data transfer interface.
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels.
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
- Integrated +3.3V level converter for USB I/O.
- True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
- High quality PCB FR4 Grade with FPT Certified.
- For more detials: Xbee USB Adapter with FT232RL
XBee XBeeS68 WiFi Features:
- No configuration needed for out-of-the-box RF communications
- Common XBee footprint for a variety of RF modules
- Fast 250 kbps RF data rate to the end node
- 2.4 GHz for worldwide deployment
- Sleep modes supported for extended battery life
- High quality PCB FR4 Grade with FPT Certified.
ESP8266 ESP-07 Breakout Board Features:
- Low price.
- Powerful internal ran LWIP agreement.
- Supports three modes: AP, STA, AP + STA coexistence mode.
- Perfect simple and efficient AT commands, allowing you to develop more simple.
- Easily embedded into any product
- For more details: ESP8266 ESP-07 Breakout Board
2pcs Screwshield Expansion Board :
- Screw directly to the terminal on the thread. Can be plugged into the arduino UNO R3 controller.
- For more details: 2pcs Screwshield Expansion Board
Screenshots:
Package Contains:
Buying Option 1:
- RDL- UNO ATMEGA328 Development Board 3 in 1
- FT232 BreakOut Board
- Serial 3 Channel AC 230V SSR Dimmer
- 4 Relay Interfacing Board 12V
- Xbee USB Adapter with FT232RL
- ESP8266 ESP-07 Breakout Board
- 2pcs Screwshield Expansion Board
- USB Cable
- 12V 2A DC Adafter
- Jumper Wire Male To Male(5)
- Jumper Wire Female To Female(5)
Buying Option 1:
- RDL- UNO ATMEGA328 Development Board 3 in 1
- FT232 BreakOut Board
- Serial 3 Channel AC 230V SSR Dimmer
- 4 Relay Interfacing Board 12V
- Xbee USB Adapter with FT232RL
- XBee XBeeS68
- 2pcs Screwshield Expansion Board
- USB Cable
- 12V 2A DC Adafter
- Jumper Wire Male To Male(5)
- Jumper Wire Female To Female(5)
Note:
- Utility software for testing the home automtion Kit.
- Above given app source code is available ony for ODM services
- Your company brand name and logo can be changed under OEM services.
- PCB and android application software can be design as per customer speification under OEM and ODM Services.
- Sample android WiFi SDK is given to develop your own custom build application.
- This module can be customize as per customer specification including custom required enclousures under OEM and ODM Services.
- Arduino source code will be provided only for the above given arduino schematic.
Documents:
Tags (0)
Reviews (0)
Frequently bought together
Customers who bought this product also commonly purchased the following combination of items.
- This Item: RDL Smart Home Automation Kit
-
WiFi-20 Channel Relay Board
-
8 Channel Relay Board-Bluetooth
-
Jumper Wire - Female Pack of 5
-
Smart Embedded and Android Based Health Monitoring System
-
Total Price ₹20,843.00
Customers Who Bought This Item Also Bought
-
Out of stock
-
-
-
Questions:
Posted by , Thursday, 3 September 2015 on product RDL Smart Home Automation Kit
-
0voteA:
Dear Sir,
It is possible depending on your requirment.
Posted by on Thursday, 3 September 2015
Posted by , on product RDL Smart Home Automation Kit
-
0voteA: Please do contact us 8088423348Posted by on Wednesday, 28 August 2024