Home /
Modules /
SSR 230V 8A Dimmer-ON/OFF Switch

SSR 230V 8A Dimmer-ON/OFF Switch

Name: SSR 230V 8A Dimmer-ON/OFF Switch
SKU: RDL628
Price: 944 INR
Availability: InStock
Rating: 89 (3 reviews)

Email to a Friend

3 Review(s) | Add Your Review

The SSR switch ON / OFF and 16 level Dimming can be controlled using controller , switches and PLC logics .This switch can be used control light , FAN, power socket , Triac dimming enabled LED's and any other remote ON / OFF or dimming application.

ORDER CODE: RDL628

Availability: In stock

₹944.00

Qty:

Product Description
We Also Recommend
Related Products
Tags (0)
Reviews (3)

Product Description

Features:

On/Off and dimming control.
Snubber circuit enable.
Accurate firing angle control and smooth dimming.
Operating Voltage 5V DC.
Isolated power section from the input.
0-100% dimming.
Inbuilt power supply.
Typical Power handling upto 1800Watts.
Maximum power handling 2760Watts *.
High quality PCB FR4 Grade with FPT Certified.

BTA12 Triac Features:

Blocking Voltage to 800 V
On-State Current Rating of 12 A RMS at 25°C
Uniform Gate Trigger Currents in Three Quadrants
High Immunity to dV/dt − 1500 V/s minimum at 125°C
Minimizes Snubber Networks for Protection
Industry Standard TO-220AB Package
High Commutating dI/dt − 1.5 A/ms minimum at 125°C
Internally Isolated (2500 VRMS)
These Devices are Pb−Free and are RoHS Compliant*

AC-DC Isolated Power Supply Module Features:

Ultra thin,ultra small.
All voltage input (AC:90~264V).
Low ripple and low noise.
Output overload and short circuit protection.
High efficiency, high power density.
The product is designed to meet the requirements of EMC and safety test.
Low power consumption,environmental protection, no load loss>0.1W.
Dimension: 34X20mm.

Screen Shots:

Input for Dimmer module:

Input for Dimmer module is of digital input of 4bit data.D0, D1, D2, D3 are the input pins of dimmer which can be connected to I/O pins microcontroller. 16 level of dimmer controlling input of 0 to 100% is shown below.

Input level	D3	D2	D1	D0	Dimmer level
0	0	0	0	0	100%
1	0	0	0	1	86%
2	0	0	1	0	80%
3	0	0	1	1	75%
4	0	1	0	0	60%
5	0	1	0	1	65%
6	0	1	1	0	60%
7	0	1	1	1	50%
8	1	0	0	0	40%
9	1	0	0	1	30%
1	1	0	1	0	25%
11	1	0	1	1	20%
12	1	1	0	0	15%
13	1	1	0	1	10%
14	1	1	1	0	5%
15	1	1	1	1	0%

Package Contains :

SSR 230V/8A Dimmer-ON/OFF Switch

Documents:

Datasheet (BTA12 TRIAC)
Code (ATMEL)
Code (PIC)
Circuit Diagram (SSR 230V/8A Dimmer-ON/OFF Switch)

We Also Recommend

Customer Reviews

Good Buy Review by Roshni

Price
Quality
Communication
Item as described
Shipping time

Awesome product. Exactly what I was looking for. Works great with raspberry pi and currently I am using it to dim the light. Snubber circuit works perfectly with no humming sound. (Posted on 17/04/2021)

Excellent product Review by Chaithra

Price
Quality
Communication
Item as described
Shipping time

Quality product and well packed. Nice buying experience. (Posted on 26/11/2016)

I brought this from E-bay Review by Bidyut Das

Price
Quality
Communication
Item as described
Shipping time

Researchdesignlab's ssr 230v 8a dimmer module is well flexible to control from various range of controllers due to its IO 4Pins and +5V,GND. Easy to control from Micro-controller. I control the dimmer module from Atmel ATMEGA 16, Arduino. Dimming is smooth & not fluctuating. Test with fluorescent light also for speed regulation of Fan. Customer support is good got immediate response as well as they provided datasheet, procedures, codes to kit start with Dimmer module.
Suggestion toward Dimmer module:
1. Also looking forward for +3.3v pin along with +5v pin
2. & update the module picture in website as received module got only one capacitor with 8a dimmer. (Posted on 18/11/2016)

Write Your Own Review

You're reviewing: SSR 230V 8A Dimmer-ON/OFF Switch

How do you rate this product? *

Rating
Price
Quality
Communication
Item as described
Shipping time

*Nickname
*Summary of Your Review
*Review

Frequently bought together

Customers who bought this product also commonly purchased the following combination of items.

This Item: SSR 230V 8A Dimmer-ON/OFF Switch
Analog SSR 230V Dimmer Module
₹396.00
Digital Dimmer Module
₹350.00
Analog SSR 230V 8A Dimmer Module
₹820.00
Jumper Wire - Female Pack of 5
₹23.00
Total Price ₹2,533.00

Total Price Excl. Tax: ₹2,533.00 Incl. Tax: ₹2,533.00

Customers Who Bought This Item Also Bought

Digital Dimmer Module
₹350.00
Analog SSR 230V 8A Dimmer Module
₹820.00
WiFi Dimmer SSR 230V 8A-ESP8266
₹1,398.00
Analog SSR 230V Dimmer Module
₹396.00

Questions:

vote

Q: hello, can it be used with home assistant like mqtt if yes can you provide sketch for mqtt, need it to work with home-assistant

Answer

Posted by gagan, Tuesday, 20 June 2017 on product SSR 230V 8A Dimmer-ON/OFF Switch

0
vote

A:
Dear Sir,

Greetings From RDL!!!

The SSR 230V 8A Dimmer-ON/OFF Switch is the normal SSR Dimmer which can be controlled by the digital input D0,D1,D2,D3 from the any microcontroller.This module working status with MQTT Protocol can be decided by the WiFi Module used by you.

We do have WiFi Dimmer given in below link, which can supports MQTT Protocol. If you know MQTT Protocol implementation, you can use MQTT Protocol. But we do not have support for MQTTProtocol.

https://researchdesignlab.com/wifi-ssr-230v-8a-dimmer.html

Posted by Raghavendra Shetty on Tuesday, 20 June 2017

vote

Q: Hello Sir, Yesterday I was received the courier. Kindly help for wire setup I use esp8266 board pin as below, Gpio 4 --> D0 Gpio 5 --> D1 Gpio 14 --> D2 Gpio 12 --> D3 Should I connect the 5v VCC and Ground to my esp8266 board? Thanks

Answer

Posted by Pravin, Monday, 13 February 2017 on product SSR 230V 8A Dimmer-ON/OFF Switch

0
vote

A:
Dear Sir/Madam,

Ok, you can connect 5V,VCC and Gnd to ESP8266 Board.

Posted by Vikhitha Shetty on Monday, 13 February 2017

vote

Q: Sorry for troubling you.. Do you have code for Arduino IDE? I'm not familer with Atmel.

Answer

Posted by Pravin, Thursday, 2 February 2017 on product SSR 230V 8A Dimmer-ON/OFF Switch

0
vote

A:
Dear Sir/Madam,

Kindly go through the Arduino IDE Code given below.

const int D0 = 4; //D0 pin pf dimmer connected to D4 ard
const int D1 = 5; //D1 pin pf dimmer connected to D5 ard
const int D2 = 6; //D2 pin pf dimmer connected to D6 ard
const int D3 = 7; //D3 pin pf dimmer connected to D7 ard

void setup() {
// put your setup code here, to run once:
pinMode(D0, OUTPUT);
pinMode(D1, OUTPUT);
pinMode(D2, OUTPUT);
pinMode(D3, OUTPUT);

digitalWrite(D0, HIGH);
digitalWrite(D1, HIGH);
digitalWrite(D2, HIGH);
digitalWrite(D3, HIGH);
}

void loop() {
// put your main code here, to run repeatedly:
digitalWrite(D0, HIGH);
digitalWrite(D1, HIGH);
digitalWrite(D2, HIGH);
digitalWrite(D3, HIGH);
delay(500);

digitalWrite(D0, LOW);
digitalWrite(D1, HIGH);
digitalWrite(D2, HIGH);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, LOW);
digitalWrite(D2, HIGH);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, LOW);
digitalWrite(D2, HIGH);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, HIGH);
digitalWrite(D2, LOW);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, HIGH);
digitalWrite(D2, LOW);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, LOW);
digitalWrite(D2, LOW);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, LOW);
digitalWrite(D2, LOW);
digitalWrite(D3, HIGH);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, HIGH);
digitalWrite(D2, HIGH);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, HIGH);
digitalWrite(D2, HIGH);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, LOW);
digitalWrite(D2, HIGH);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, LOW);
digitalWrite(D2, HIGH);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, HIGH);
digitalWrite(D2, LOW);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, HIGH);
digitalWrite(D2, LOW);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, HIGH);
digitalWrite(D1, LOW);
digitalWrite(D2, LOW);
digitalWrite(D3, LOW);
delay(500);
digitalWrite(D0, LOW);
digitalWrite(D1, LOW);
digitalWrite(D2, LOW);
digitalWrite(D3, LOW);
delay(20000);

}

Posted by Vikhitha Shetty on Thursday, 2 February 2017

vote

Q: Hello Sir, Kindly provide sample code. Thanks

Answers

Posted by Pravin, Friday, 27 January 2017 on product SSR 230V 8A Dimmer-ON/OFF Switch

0
vote
A:
Dear Sir/Madam,

Kindly click below link for related documents of SSR 230V 8A Dimmer On-Off Switch.

https://researchdesignlab.com/ssr-230v-8a-dimmer-on-off-switch.html

Documents:
- Datasheet (BTA12 TRIAC)
- Code (ATMEL)
- Code (PIC)
- Circuit Diagram (SSR 230V/8A Dimmer-ON/OFF Switch)
Posted by Vikhitha Shetty on Friday, 27 January 2017
0
vote
A:
Dear Sir/Madam,

Kindly click below link for related documents of SSR 230V 8A Dimmer On-Off Switch.

https://researchdesignlab.com/ssr-230v-8a-dimmer-on-off-switch.html

Documents:
- Datasheet (BTA12 TRIAC)
- Code (ATMEL)
- Code (PIC)
- Circuit Diagram (SSR 230V/8A Dimmer-ON/OFF Switch)
Posted by Vikhitha Shetty on Friday, 27 January 2017

vote

Q: Hello Sir, Can we use "SSR 230V 8A Dimmer-ON/OFF Switch" with esp8266 nodemcu? Regards, Pravin

Answer

Posted by Pravin, Saturday, 21 January 2017 on product SSR 230V 8A Dimmer-ON/OFF Switch

0
vote

A:
Dear Sir/Madam,

Yes, you can use SSR 230v 8A Dimmer with ESP8266 Module.

Posted by Vikhitha Shetty on Saturday, 21 January 2017

View all related questions.

SSR 230V 8A Dimmer-ON/OFF Switch

Product Description

We Also Recommend

Related Products

Tags (0)

Reviews (3)

AC-DC Isolated Power Supply Module Features:

8051 AT89S52 Development Board

ATMEGA 16 32 64 Development Board

PIC Development Board

Customer Reviews

How do you rate this product? *

Digital Dimmer Module

Analog SSR 230V 8A Dimmer Module

WiFi Dimmer SSR 230V 8A-ESP8266

Analog SSR 230V Dimmer Module

Questions:

Ask Your Question

More Views

SSR 230V 8A Dimmer-ON/OFF Switch

AC-DC Isolated Power Supply Module Features:

Customer Reviews

How do you rate this product? *

Questions:

Ask Your Question