Customers who bought this product also commonly purchased the following combination of items.
- This Item: RFID Reader - Serial
-
RFID Card
-
RFID Reader-USB V2
-
USB To RS232 Converter
-
USB RFID READER
-
Questions:
-
0voteA:
Dear Sir/Madam,
You can use either DB9 Connector or TTL to interface RFID Reader-Serial with PIC.Kindly go through the code given below.
RFID Reader - Serial
/*
* Project name:
RFID Reader - Serial
* Copyright
(c) Researchdesignlab.com
* Test configuration:
MCU: PIC16F877A
Dev.Board: PIC
Oscillator: 20.0 MHz
Software: mikroC PRO for PIC v 4.6*/
// LCD module connections
sbit LCD_RS at RB4_bit;
sbit LCD_EN at RB5_bit;
sbit LCD_D4 at RB0_bit;
sbit LCD_D5 at RB1_bit;
sbit LCD_D6 at RB2_bit;
sbit LCD_D7 at RB3_bit;sbit LCD_RS_Direction at TRISB4_bit;
sbit LCD_EN_Direction at TRISB5_bit;
sbit LCD_D4_Direction at TRISB0_bit;
sbit LCD_D5_Direction at TRISB1_bit;
sbit LCD_D6_Direction at TRISB2_bit;
sbit LCD_D7_Direction at TRISB3_bit;
// End LCD module connectionsunsigned char byte;
void main()
{
Delay_ms(200);
UART1_Init(9600); // Initialize UART module at 9600 bps
Delay_ms(100);
Lcd_Init(); // Initialize LCD
Lcd_Cmd(_LCD_CLEAR); // Clear display
Lcd_Cmd(_LCD_CURSOR_OFF);while(1)
{byte=0;
Delay_ms(200);
Lcd_Out(1,1," RFID Reader...");
Lcd_Cmd(_LCD_SECOND_ROW);
while(byte!=10)
{
while(!UART1_Data_Ready()); // If data is received,
byte = UART1_Read();
Lcd_Chr_Cp(byte);
}
Delay_ms(200);}
}Kindly click below link for other details of RFID Reader-Serial.
https://researchdesignlab.com/rfid-reader-serial.html
Posted by on Monday, 9 January 2017
-
0voteA:
Dear Sir.
It is a read only cards.
Posted by on Saturday, 26 September 2015
-
0voteA:
Dear Pranshu
The RFID can be interfaced with Atmel using TTL connection.
Posted by on Monday, 14 September 2015
-
0voteA:
Dear Sir
Please connect Tx from RFID reader to Rx of the Ardiuno , and GND of the RFID to GND of ardiuno.Posted by on Thursday, 3 September 2015