Sensors are the hopeful device for precision agriculture. By forming wireless sensor network we can make good monitoring system in the paddy crop field area. This project proposed idea about monitoring the crop field area without man power. The fundamental concept of this project is to provide a highly enabled monitoring of crop field. In this all the different sensor values such as ph sensor, temperature sensor, moisture sensor sends value through gprs and the values are sensed and processed and if any of the sensor value exceeds the minimum or maximum value, a alarm is activated and the farmer gets a message on his phone and also a email message.

 Order Code : RDL/AGM/13/001/V1.0

This Bluetooth Module enables you to wireless transmit & receive serial data. It is a drop in replacement for wired serial connections allowing transparent two-way data communication. You can simply use it for a serial port replacement to establish a connection between MCU or embedded project and PC for data transfer. This board operates on 5V and has LED indication and 3V regulator.

 Order Code: RDL/BLT/13/001/V1.0

The  SSR switch  ON / OFF and  16 level Dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL628

Automatic meter reading, or AMR, is the technology of automatically collecting consumption, diagnostic, and status data from energy metering devices (electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. 

ORDER CODE: RDL/DIY-AMRPC/14/001/V1.0

It’s a common high speed IC used to convert USB to serial converter. It’s quite commonly used to connect a microcontroller TTL data to any USB interface host to establish a bridge for communications between USB to serial devices. This particular breakthrough board can be used to program RDL UNO ATMEGA 328 and use directly in to your own circuits. Also this breakthrough board can also act as a bridge between Xbee and its Xbee utility software to configure various Xbee’s.

Order Code : RDL/FTO/14/001/V1.0

This double sided pinboard features one side of the patch is 32 pin -64 pin turn DIP, 0.8mm spacing and the other side is 32 pin-100PIN pitch 0.5mm pitch.

ORDER CODE: RDL/QFP/15/001/V1.0

ORDER CODE: RDL675