Components

MC14049UBDR2G Logic, Buffer, MC14049, 3 V to 18 V, SOIC-16

The MC14049UB hex inverter/buffer is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. This complementary MOS device finds primary use where low power dissipation and/or high noise immunity is desired. This device provides logic−level conversion using only one supply voltage, VDD. The input−signal high level (VIH) can exceed the VDD supply voltage for logic−level conversions. Two TTL/DTL Loads can be driven when the device is used as CMOS−to−TTL/DTL converters (VDD = 5.0 V, VOL ≤ 0.4 V, IOL ≥ 3.2 mA). Note that pins 13 and 16 are not connected internally on this device; consequently, connections to these terminals will not affect circuit operation.

Pull-up resistors are used in electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels, if external devices are disconnected or high-impedance is introduced. They may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.A pull-up resistor weakly "pulls" the voltage of the wire it is connected to towards its voltage source level when the other components on the line are inactive.

Order Code : RDL/PUR1K/13/001/V1.0

10 Pin FRC Cable with Female connectors at both ends.

 Order Code : RDL/10FRCCBL/13/001/V1.0

USB Type B connectors, officially referred to asStandard-B connectors, are square in shape with either a slight rounding or large square protrusion on the top, depending on the USB version.

ORDER CODE: RDL/USB-B/15/001/V1.0

PNP transistor in a TO-92; SOT54 plastic package.

ORDER CODE: RDL/BC557/15/001/V1.0

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

ORDER CODE: RDL/16MCR/15/001/V1.0

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

ORDER CODE: RDL/12MHZ/15/001/V1.0

This is a common barrel-type power socket for DC power supplies. These are compatible with our DC power supplies and have a 2.1mm diameter centre pin.

Order Code : RDL/DCS/13/001/V1.0

The 1N4148  are high-speed switching diodes fabricated in planar technology, and encapsulated in hermetically sealed leaded glass SOD27 (DO-35) packages.

ORDER CODE: RDL/DI4/15/001/V1.0