The popularity of home automation has been increasing greatly in recent years due to much higher affordability and simplicity through smartphone and computer connectivity. Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security. 

Order Code : RDL/SHM/13/001/V1.0

secure low cost Automatic Meter Reading (AMR) system that calculates and transmits the total electrical energy consumption to main server using General Packet Radio Service (GPRS) technology provided by GSM networks. The proposed AMR system consists of three main parts: Accurate digital meter, a transmission facility and the billing server. To make affordable AMR system a low cost off-the-shelf materials are used.

Order Code : RDL/AMR/13/001/V1.0

This Project provides guidelines for implementing an asset tracking solution at an organization of any significant size. it is intended for asset managers who need to keep track of a large number of physical assets such as computer equipment, vehicles, furniture or other high-value objects.

 Order Code : RDL/ATS/13/001/V1.0

If you are learning microcontrollers or want to quickly develop embedded solution based on standard 8051 core, this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller. With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware . The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/ATR/13/001/V1.0

With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware.. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/PIC-GB/13/001/V1.0

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0

If you are learning microcontrollers or want to quickly develop embedded solution based on standard 8051 core, this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller. With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware . The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware..The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/PPIC/14/001/V1.0