Search results for 'ph level'

Pull-up resistors are used in electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels, if external devices are disconnected or high-impedance is introduced. They may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.A pull-up resistor weakly "pulls" the voltage of the wire it is connected to towards its voltage source level when the other components on the line are inactive.

Order Code : RDL/PUR1K/13/001/V1.0

Irrigation using fresh water resources is a task of high importance in Agriculture.Efficient water management system is essential because of the large quantity of fresh water consumed for this purpose. Optimal usage of fresh water resources has been achieved by means of Automation. Determining when and where to irrigate and how much water to use by  soil moisture monitoring at particular intervals of time will help in making an efficient automated irrigating system. The project automates the whole process and removes the need for workmanship.

Order Code : RDL/DSC/13/001/V1.0

Intelligent Vehicle tracking systems (IVTS) are used for the purpose of tracking and navigation of vehicles. The paper describes the implementation of Global positioning systems (GPS) in IVTS systems. Further a critical GPS based low cost IVTS architecture has been described. The first part of the paper describes the need and the basic architecture of a general GPS based IVTS system.The GPS based low cost intelligent vehicle tracking system can be successfully designed and applied in the urban environment of a developing country like India. This if implemented in a well planned manner will bring significant revolutionary enhancement in the I n d ia n transportation industry.

  Order Code : RDL/VTS/13/001/V1.0

Sensors are the hopeful device for precision agriculture. By forming wireless sensor network we can make good monitoring system in the paddy crop field area. This project proposed idea about monitoring the crop field area without man power. The fundamental concept of this project is to provide a highly enabled monitoring of crop field. In this all the different sensor values such as ph sensor, temperature sensor, moisture sensor sends value through gprs and the values are sensed and processed and if any of the sensor value exceeds the minimum or maximum value, a alarm is activated and the farmer gets a message on his phone and also a email message.

 Order Code : RDL/AGM/13/001/V1.0

Pull-up resistors are used in electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels, if external devices are disconnected or high-impedance is introduced. They may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.A pull-up resistor weakly "pulls" the voltage of the wire it is connected to towards its voltage source level when the other components on the line are inactive.

Order Code : RDL/PUR/13/001/V1.0

Digital Soil Moisture Sensor is having triple output mode i.e., Digital output is simple; Analog output is more accurate and Serial output with exact readings. The sensor will detect the moisture of the soil i.e shortage of water contents in the soil and if the contents are low the module output will be high otherwise the out put will remain in neutral condition. This sensor can be used for the automation of the gardening etc.

 Order Code: RDL/SLM/13/001/V1.0

Machine vision (system vision) it’s a apply computer vision in day to day life. While computer vision is focused mainly on image processing at the level of hardware, machine vision most often requires the use of additional hardware I/Oand computer networks to transmit information generated by the other process components. In vision based security system a camera is used to monitor a chamber. Image processing is applied to the acquired frame, and determined whether a security alert is required or not.

Order Code : RDL/MVS/13/001/V1.0

The popularity of home automation has been increasing greatly in recent years due to much higher affordability and simplicity through smartphone and computer connectivity. Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security. 

Order Code : RDL/SHM/13/001/V1.0

The board uses BTA12-600B, Triac suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers.

Order Code : RDL/LDC/13/001/V1.0