Search results for 'smart irrigation system'

If you are learning microcontrollers or want to quickly develop embedded solution based on standard 8051 core, this board will help you quick start with the application by giving you access to everything required to run the AT89S52 microcontroller. With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware . The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/ATR/13/001/V1.0

4 Channel Opto-Isolated Board is a 4 channel opto-isolator board assembly that allows microcontroller and other logic circuits to be interfaced to both input and output signals that require opto-isolation.This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. 

 Order Code : RDL/OPT/13/001/V1.0

The PICkit™ 2 Development Programmer/Debugger is a low-cost development tool with an easy to use interface for programming and debugging Microchip’s Flash families of microcontrollers

Order Code : RDL/PIK/13/001/V1.0

Driver fatigue is a significant factor in a large number of vehicle accidents. The development of technologies for detecting or preventing drowsiness at the wheel is a major challenge in the field of accident avoidance systems. Because of the hazard that drowsiness presents on the road, methods need to be developed for counteracting its affects. The aim of this project is to develop a prototype drowsiness detection system. The focus will be placed on designing a system that will accurately monitor the head movements of a driver in real-time. By monitoring the head movements, it is believed that the symptoms of driver fatigue can be detected early enough to avoid a car accident.

Order Code : RDL/MDDM/13/001/V1.0

 This programmer is based on USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware.8051 USB programmer supports 7 Atmel 8051 microcontrollers. It is a reliable tool for fast programming of 8051 devices.

Order Code : RDL/ATB/13/001/V1.0

Driver fatigue is a significant factor in a large number of vehicle accidents. The development of technologies for detecting or preventing drowsiness at the wheel is a major challenge in the field of accident avoidance systems. Because of the hazard that drowsiness presents on the road, methods need to be developed for counteracting its affects. The aim of this project is to develop a prototype drowsiness detection system. The focus will be placed on designing a system that will accurately monitor the head movements of a driver in real-time. By monitoring the head movements, it is believed that the symptoms of driver fatigue can be detected early enough to avoid a car accident.

 Order Code : RDL/MDD/13/001/V1.0

A facial recognition system is a computer application for automatically identifying or verifying a person from a digital image or a video frame from a video source. One of the ways to do this is by comparing selected facial features from the image and a facial database. It is typically used in security systems and can be compared to other biometrics such as fingerprint or eye iris recognition systems.

Order Code : RDL/MFA/13/001/V1.0

Intelligent Vehicle tracking systems (IVTS) are used for the purpose of tracking and navigation of vehicles. The paper describes the implementation of Global positioning systems (GPS) in IVTS systems. Further a critical GPS based low cost IVTS architecture has been described. The first part of the paper describes the need and the basic architecture of a general GPS based IVTS system.The GPS based low cost intelligent vehicle tracking system can be successfully designed and applied in the urban environment of a developing country like India. This if implemented in a well planned manner will bring significant revolutionary enhancement in the I n d ia n transportation industry.

  Order Code : RDL/VTS/13/001/V1.0

Hand vein patterns are unique and universal. Vein pattern is used as biometric feature in recent years. But, it is not very much popular biometric system as compared to other systems like fingerprint, iris etc., because of the higher cost. For conventional algorithm, it is necessary to use high quality images, which demand high-priced collection devices. The two approaches for vein authentication are repeated line tracking and maximum curvature method. Currently we are working on maximum curvature method. Here we are putting forward the new approach for low cost hand dorsa vein pattern acquisition using low cost device and proposing an algorithm to extract features from these low quality images which are used for personal authentication. 

Order Code : RDL/PVA/13/001/V1.0