Search results for 'project ideas for cse'

It’s a common high speed IC used to convert USB to serial converter. It’s quite commonly used to connect a microcontroller TTL data to any USB interface host to establish a bridge for communications between USB to serial devices. This particular breakthrough board can be used to program RDL UNO ATMEGA 328 and use directly in to your own circuits. Also this breakthrough board can also act as a bridge between Xbee and its Xbee utility software to configure various Xbee’s.

Order Code : RDL/FTO/14/001/V1.0

Arduino Xbee Adapter Development Board allows an Arduino board to communicate wirelessly using  Zigbee or BlueTooth.This shield is build up by two parts: Bluetooth and Xbee shield.This Bluetooth shield is a serial port Bluetooth module (Slave/Master) breakout board. you can directly stack on Arduino and use the UART port for Bluetooth communication.XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the XBee module serial port.XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board.It can directly plug in with Arduino.

Order Code : RDL/GRS/14/001/V1.0

Xbee USB Adapter with FT232RL  shield works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.Plug the unit into the XBee shield, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.

 Order Code : RDL/XUCA/13/001/V1.0

Xbee USB adapter provides easy way for mounting the xbee module and taking the external TTL connection(RX,TX,GND) can be connected to any microcontroller. Power supply can be given to the external or USB.

 Order Code : RDL/XUC/13/001/V1.0

Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.

Order Code : RDL/BLC/13/001/V1.0

Few older devices use DB9 connectors, but most modern computers use USB  port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.

 Order Code : RDL/U2U/13/001/V1.0