Modules
-
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ORDER CODE: RDL652
Learn More -
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ORDER CODE: RDL675
Learn More -
The IO Expander Board is based on the Microchip MCP23017 Expander Chip. This high-performance IC, allows connection to a range of High-Speed I²C buses, including the standard 100kHz bus, as well as the newer 400kHz and 1.7MHz bus standards.
ORDER CODE: RDL637
Learn More -
Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.
Order Code : RDL/BLC/13/001/V1.0
Learn More -
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More -
The FT245 USB Breakout Board is an accessory board that provides a USB to parallel FIFO interface, with FT245 chip onboard.
Order Code : RDL/FTB/14/001/V1.0
Learn More -
USB Host Board now makes it even easier to integrate USB functionality into your products and with the USB Host device you can implement USB Host Controller functionality in no time at all. The FT311D provides a bridge between peripheral hardware and an Android platform with a USB device port.
ORDER CODE: RDL/HBS/15/001/V1.0
Learn More -
The breadboard power supply kit that takes power from a DC adapter jack and provide outputs a selectable 1.8V,3.3V,5V,9V,12V and custom adjustable voltage from 0V to 12V. Breadboard power supply headers are mounted on the bottom of the PCB for simple insertion into a breadboard.
Order Code: RDL617
Learn More -
The AT24CXX EEPROM Board is a storage tool for EEPROM with I2C interface, It is a non-volatile memory module.
Order Code : RDL/EEP/14/001/V1.0
Learn More -
It provides high quality recording and playback with 11 Minutes audio at 8 Khz Sampling rate with 16 bit resolution. The aPR33A series C2.x is specially designed for simple key trigger, user can record and playback the message averagely for 1, 2, 4 or 8 voice message(s) by switch, It is suitable in simple interface or need to limit the length of single message.
Order Code : RDL/APR/13/001/V1.0
Learn More