Modules
-
PCA9685 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously.
ORDER CODE: RDL682
Learn More -
One of the basic interfacing requirements for the hobbyists or electronics enthusiasts is I/P (keypad) and O/P (LCD display) for proyotype applications. This shield uses minimum number I/O’s that is 4 bits for LCD data and 2 control signal lines for the same. A single analog pin (Pin A0) is multiplexed to read 5 input key switches (Navigation keys). Each key has been pulled up to a different voltage level, so a different voltage will be generated every time a user selects a key. This voltage could be read by the analog pin A0 on the board. Hence saves the no of I/O pins. The backlight of the LCD could be controlled by setting PWM (Pin D10) by adding a few lines of code.
Order Code : RDL/RLSS/14/001/V1.0
Learn More -
One of the basic interfacing requirements for the hobbyists or electronics enthusiasts is I/P (keypad) and O/P (LCD display) for proyotype applications. This shield uses minimum number I/O’s that is 2 bits(D0 and D1) for LCD data . 5 input key switches (Navigation keys), when it's activated serial data will be sent to pin D0 by internal 2 line LCD controller. Each key has been pulled up to a different voltage level, so a different voltage will be generated every time a user selects a key. This voltage could be read by the analog pin of internal 2 line LCD controller on the board. Hence saves the no of I/O pins. The backlight of the LCD could be controlled by setting PWM (Pin D10) by adding a few lines of code.
Order Code : RDL/LKS/14/001/V1.0
Learn More -
LCD stands for Liquid Crystal Dispaly. It can be used to display anything. They are of many types. The ones we commonly use for embedded systems, robotics, etc are of two types – character LCD and graphical LCD. The 16x2 LCD Characters have their own limitations; they can only display characters of certain dimensions. The Graphical LCDs are thus used to display customized characters and images. The Graphical LCDs find use in many applications; they are used in video games, mobile phones, lifts etc. as display units.
Order Code : RDL/LCD/14/001/V1.0
Learn More -
This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface so if your microcontroller is working on 3V you can use this board readily. The interface board provided is for microcontrollers running at 3V.
Order Code : RDL/SDBB/14/001/V1.0
Learn More -
This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface.
Order Code : RDL/SDBB5V/14/001/V1.0
Learn More -
Xbee USB adapter provides easy way for mounting the xbee module and taking the external TTL connection(RX,TX,GND) can be connected to any microcontroller. Power supply can be given to the external or USB.
Order Code : RDL/XUC/13/001/V1.0
Learn More -
Xbee USB Adapter with FT232RL shield works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.Plug the unit into the XBee shield, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.
Order Code : RDL/XUCA/13/001/V1.0
Learn More -
This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Development Board, attach a RS232 cable, and you will have direct access to the serial and programming pins on the XBee unit.
Order Code : RDL/XSU/14/001/V1.0
Learn More -
Few older devices use DB9 connectors, but most modern computers use USB port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.
Order Code : RDL/U2U/13/001/V1.0
Learn More