Modules

This is a cost effective and simple Arduino GSM and GPRS shield. Module SIM800C Modem is being used.

ORDER CODE: RDL808

Add on Automated Fault  Alerting  block for any existing PLC & SCADA environment to send SMS to remote user on real time basis.

ORDER CODE: RDL809

GSM GPRS M95 QUECTEL Modem -RS232 is built with Quad-Band GSM GPRS engine-M95, works on frequencies 850/900/1800/1900MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as a microcontroller with RS232 Chip(MAX232). 

ORDER CODE: RDL815

GSM GPRS SIM800C Modem- Serial TTL is built with Quad-Band GSM GPRS engine-SIM800C, works on frequencies 850/900/1800/1900MHz. The Modem is coming with TTL interface, which allows you connect PC as well as a microcontroller with TTL

ORDER CODE: RDL840

Xbee USB Adapter with FT232RL  shield works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.Plug the unit into the XBee shield, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.

 Order Code : RDL/XUCA/13/001/V1.0

It’s a common high speed IC used to convert USB to serial converter. It’s quite commonly used to connect a microcontroller TTL data to any USB interface host to establish a bridge for communications between USB to serial devices. This particular breakthrough board can be used to program RDL UNO ATMEGA 328 and use directly in to your own circuits. Also this breakthrough board can also act as a bridge between Xbee and its Xbee utility software to configure various Xbee’s.

Order Code : RDL/FTO/14/001/V1.0

The breadboard power supply kit that takes power from a DC adapter jack  and provide outputs a selectable 1.8V,3.3V,5V,9V,12V and custom adjustable voltage from 0V to 12V.  Breadboard power supply headers are mounted on the bottom of the PCB for simple insertion into a breadboard.

Order Code: RDL617

Few older devices use DB9 connectors, but most modern computers use USB  port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.

 Order Code : RDL/U2U/13/001/V1.0

Industrial grade Isolated Serial USB to RS232 adapter build the communication link between DAQ / DAS, PLC’s and any serial port enabled devices to USB enabled devices

Order Code: RDL898