Modules

This module contains no self-locking function, simple implementation, wireless remote control by pressing a key, the receiver output a high level, the corresponding output when key releases. High level at the receiving end disappear, and each channel are independent of each other, each other. The output of high level can directly drive the relay.

ORDER CODE: RDL/4CWR/14/001/V1.0

Adapter for standard 32 SSOP SMD Parts to convert to standard 32 Pin DIP size.This SSOP breakout board is a PCB which will interface an SSOP package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 32-pin SSOP form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit.  

Order Code : RDL/BOB/14/001/V2.0

Adapter for standard 32 SOIC SMD Parts to convert to standard 32 Pin DIP size.This SOIC breakout board is a PCB which will interface an SOIC package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 32-pin SOIC form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit. 

Order Code : RDL/SOIC/14/001/V2.0

This double sided pinboard features one side of the patch is 16 pin -60 pin turn DIP, 0.5mm spacing and the other side is 32 pin,44PIN, 64 pin, pitch 0.8mm pitch.

Order Code : RDL/QFP/14/001/V1.0

This double sided pinboard features one side of the patch is 16 pin -60 pin turn DIP, 0.5mm spacing and the other side is 32 pin,44PIN, 64 pin, pitch 0.8mm pitch.

Order Code : RDL/TQFP/14/001/V1.0

It provides high quality recording and playback with 11 Minutes audio at 8 Khz Sampling rate with 16 bit resolution. The aPR33A series C2.x is specially designed for simple key trigger, user can record and playback the message averagely for 1, 2, 4 or 8 voice message(s) by switch, It is suitable in simple interface or need to limit the length of single message.

Order Code : RDL/APR/13/001/V1.0

The AT24CXX EEPROM Board is a storage tool for EEPROM with I2C interface, It is a non-volatile memory module.

Order Code : RDL/EEP/14/001/V1.0

Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.

Order Code : RDL/BLC/13/001/V1.0

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0