Modules
-
The project aims at designing Home automation system using Wi-Fi technology,you can start with one room or automate the entire house.The system offers one-touch control of lights and appliances.
ORDER CODE: RDL760
Learn More -
It is perfectly suitable for applications that need location acquirement of remote objects.Hence you can track remote objects like trucks, cars,Buses, ships and more quickly and easily. With this you can track the exact location of the vehicle using the particular software platform.The device ensures up-to-date status monitoring and delivery of the location/alarm messages to the end user’s registered mobile immediately. Location/status information is relayed through a hosted server, which allows for anywhere access logging as well as multi – user registered access.
ORDER CODE: RDL774
Learn More -
The USB-RS485 Converter Module is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust USB to RS-485 protocol conversion with automatic RS-485 flow control.ORDER CODE: RDL812
Learn More -
-
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ORDER CODE: RDL652
Learn More -
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ORDER CODE: RDL675
Learn More -
The IO Expander Board is based on the Microchip MCP23017 Expander Chip. This high-performance IC, allows connection to a range of High-Speed I²C buses, including the standard 100kHz bus, as well as the newer 400kHz and 1.7MHz bus standards.
ORDER CODE: RDL637
Learn More -
Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.
Order Code : RDL/BLC/13/001/V1.0
Learn More -
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More -
The FT245 USB Breakout Board is an accessory board that provides a USB to parallel FIFO interface, with FT245 chip onboard.
Order Code : RDL/FTB/14/001/V1.0
Learn More