This adapters allow you to quickly and easily mount a USB Type A Female connector onto a breadboard or prototype boards. This breakout board brings all 4 pins of its USB Type A Female socket out to prototyping work.Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits.

Order Code : RDL/UBA/14/001/V1.0

This adapter allows you to connect a 2.5 mm barrel jack connector to bare wires. One end has 3 pin screw terminals . If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

Order Code : RDL/DSB/14/001/V1.0

Screw Connector Breakout Board

Order Code : RDL/SBB/14/001.V1.0

This is Eight  Channel relay board controlled through RS485 protocol. The RS485 relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Order Code : RDL/8RB-R/14/001/V1.0

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0