Interfacing Board

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0

LCD stands for Liquid Crystal Dispaly. It can be used to display anything. They are of many types. The ones we commonly use for embedded systems, robotics, etc are of two types – character LCD and graphical LCD. The 16x2 LCD Characters have their own limitations; they can only display characters of certain dimensions. The Graphical LCDs are thus used to display customized characters and images. The Graphical LCDs find use in many applications; they are used in video games, mobile phones, lifts etc. as display units.   

Order Code : RDL/LCD/14/001/V1.0

The ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial and communication systems. The devise package allows for easy implementation by the customer. The typical application includes motor control, load detection management, switch mode power supplies and over current fault protection. The device is not intended for automotive applications.

Order Code : RDL/CS5/14/001/V2.0

This simple board breaks out a female USB type B connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. The +5V and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. 

Order Code : RDL/UBB/14/001/V1.0

Adapter for standard 32 SOIC SMD Parts to convert to standard 32 Pin DIP size.This SOIC breakout board is a PCB which will interface an SOIC package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 32-pin SOIC form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit. 

Order Code : RDL/SOIC/14/001/V2.0

This is Eight  Channel relay board controlled through RS485 protocol. The RS485 relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Order Code : RDL/8RB-R/14/001/V1.0

The board has only one  relay driven by TTL circuit and MCT2E IC for isolation purpose.The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control relays. Relay can switch varierty of AC or DC high voltage, high current 20A,loads working at 110V or 230V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.

Order Code : RDL/SRB/14/001/V3.0

The regulated power supply accepts unregulated intputs from 12V to 15V AC or DC and gives regulated output of 3.3V  5V and 12V suitable for  projects which needs precise voltage to work. The input can come from step down transformer. Since board has diode  bridge input polarity does not matter.All outputs are brought to screw terminal. There is also an unregulated output voltage to drive high current loads like relays and motors.

The board has only one  relay driven by TTL circuit . The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.

Order Code : RDL/1RB/13/001/V1.0