Communication Converters
-
Arduino Xbee Adapter Development Board allows an Arduino board to communicate wirelessly using Zigbee or BlueTooth.This shield is build up by two parts: Bluetooth and Xbee shield.This Bluetooth shield is a serial port Bluetooth module (Slave/Master) breakout board. you can directly stack on Arduino and use the UART port for Bluetooth communication.XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the XBee module serial port.XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board.It can directly plug in with Arduino.
Order Code : RDL/GRS/14/001/V1.0
Learn More -
This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Development Board, attach a RS232 cable, and you will have direct access to the serial and programming pins on the XBee unit.
Order Code : RDL/XSU/14/001/V1.0
Learn More -
The USB-RS485 Converter Module is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust USB to RS-485 protocol conversion with automatic RS-485 flow control.
ORDER CODE: RDL812
Learn More -
Industrial grade Isolated Serial USB to RS485 adapter build the communication link between DAQ / DAS, PLC’s and any serial port enabled devices to USB enabled devices.
Order Code: RDL904
-
Few older devices use DB9 connectors, but most modern computers use USB port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.
Order Code : RDL/U2U/13/001/V1.0
-
Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.
Order Code : RDL/BLC/13/001/V1.0
Learn More -
The USB to RS485 is a fully automatic plug-and-play USB module that connects to your PC via the Universal Serial Bus (USB) port and provides robust bidirectional USB to RS-485 protocol conversion with automatic RS-485 flow control.
Order Code: RDL/RSU/14/001/V1.0
-
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More