Popular Products

This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface so if your microcontroller is working on 3V you can use this board readily. The interface board provided is for microcontrollers running at 3V.

Order Code : RDL/SDBB/14/001/V1.0

Adapter for standard 20 SOIC SMD Parts to convert to standard 20 Pin DIP size.This SOIC breakout board is a PCB which will interface an SOIC package to 0.1" (2.54mm) headers which can be used on breadboards for prototyping your projects.Simply solder-on your 20-pin SOIC form-factor IC, along with some 0.1-inch-pitch headers, and you will have a usable, breadboard-friendly unit. 

Order Code : RDL/BB20/13/001/V1.0

LPC2129 is a single-chip 32-bit microcontroller with 256KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 16KB RAM having Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL. This IC also supports Interrupt Controller, 2 SPI serial interfaces, Two UARTs, I2C serial interface, PWM unit with up to 6 PWM outputs, Two timers (7 capture/compare channels),  4-channels 10bit ADC, 2 CAN channels. 

Order Code : RDL/LPC-29C/14/001/V1.0

Indino 4.0 series defines a new way of transforming factories into smart/intelligent factories for efficient and easy remote monitoring operational status of facilities such as on/off status, pressure and temperature. Indino 4.0 supporting for wide range of industrial protocols like Modbus, MQTT, JSON, RESTful, TCP/UDP, SNMP protocol, which makes the monitoring and solution integration, easier than ever for IT engineers through open source APIs.

ORDER CODE: RDL813

DB9 ports are very common on most types of microcontroller, where they can be used to communicate with a PC or other serial devices.

Order Code : RDL/DBF/13/001/V1.0

This is a common barrel-type power socket for DC power supplies. These are compatible with our DC power supplies and have a 2.1mm diameter centre pin.

Order Code : RDL/DCS/13/001/V1.0

This is an IC base for 16 Pin IC's. This base is very useful for your circuit because if your IC burns out you can easily change the IC without the need of desoldering. 

Order Code : RDL/16PB/13/001/V1.0