The product is designed to seamlessly integrate with the IoT and Analytical processing systems. Supporting multiple I/O options, interfaces data logger is a perfect fit to build custom automation solutions. Industrial Data Logger 4.0 can used to build the custom industrial solution for monitoring and controlling PLC and SCADA, HMI, VFD Motors, servo, Valves, energy meter, actuators, relays, encoder, rfid and finger print readers, industrial sensors and many more with below mentioned operational benefits.

ORDER CODE: RDL841

Control anything anywhere any time. Save power. Eliminate service calls. Switch routers, servers, lighting, even industrial machinery via the web and App. Customize the web server with your own using RDL IoT SDK. Each relay can switch AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and any electrical equipment.

ORDER CODE: RDL775

Pay Electric Power Smart card system is the solution for the people who travel and required electric power in the public places like BUS Stand, Railway Station And Highways. Based on the number of units in rechargeable card the microcontroller will decide number of electrical units should be provided to the User.

Order Code : RDL/POW/13/001/V1.0

A 4x4 matrix keypad requiring eight Input/Output ports for interfacing isused as an example. Rows are connected to Peripheral Input/Output (PIO) pins configured as output. Columns are connected to PIO pins configured as input with interrupts. In this configuration, four pull-up resistors must be added in order to apply a high level on the corresponding input pins.

Note: The color of the PCB may vary. However the circuit/pinout of the PCB will remain same.

Order Code : RDL/4X4KP/13/001/V2.0

It is widely used in electronic,instrumentation,automation,communications,power supply units,student projetcs,amplifiers,medical and wellness devices,test and measurement equipment,industrial control,pheripheral devices and intrfaces, switch boxes.

ORDER CODE:RDL725

Processing Days: 10-15 Working Days

This adapters allow you to quickly and easily mount a RJ45 connector onto a breadboard or prototype boards. This breakout board brings all 8 pins of its RJ45 socket out to prototyping work. Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits.

Order Code : RDL/RJ45/14/001/V1.0

This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface so if your microcontroller is working on 3V you can use this board readily. The interface board provided is for microcontrollers running at 3V.

Order Code : RDL/SDBB/14/001/V1.0