A diode is a two-terminal electronic component with asymmetric conductance; it has low  resistance to current in one direction, and high  resistance in the other direction.

Order Code : RDL/DIN/13/001/V1.0

Xbee USB adapter provides easy way for mounting the xbee module and taking the external TTL connection(RX,TX,GND) can be connected to any microcontroller. Power supply can be given to the external or USB.

 Order Code : RDL/XUC/13/001/V1.0

Controlling appliances is a main part of automation. The main object  of  Home  automation  is  to  provide  a  wireless communication  link  of  home  appliances  to  the  remote  user. The  main  objective  of  this  work  is  to  make  such  a  system which  controls  the  home  appliances  remotely.  Here we have demonstrated a simple yet a sophisticated way to control home appliances via an Android phone. 

ORDER CODE: RDL/DIY-BUNO/14/001/V1.0

The components of solar powered intelligent drip irrigation system are shown in Fig. Soil moisture sensor is used for real-time collection of crop root soil moisture content and converting it into a signal in the range of Voltage V; and the signal will transformed as knowledge of water requirement of crop. Soil moisture content at the root zone of different crops is collected by using the soil moisture sensor. The threshold limit for the water requirement for a particular crop has been feed to system which in turn controls the operation the control system. The power needed for the operation of the control system has been met with the use of a solar panel and the display will receive the control signal and display the data stored using the sensor from the field.

ORDER CODE: RDL/DIY-DRI/14/001/V1.0

The board has only one  relay driven by TTL circuit and MCT2E IC for isolation purpose.The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control relays. Relay can switch varierty of AC or DC high voltage, high current 20A,loads working at 110V or 230V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.

Order Code : RDL/SRB/14/001/V3.0

This adapters allow you to quickly and easily mount a RJ45 connector onto a breadboard or prototype boards. This breakout board brings all 8 pins of its RJ45 socket out to prototyping work. Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits.

Order Code : RDL/RJ45/14/001/V1.0

If you are learning microcontrollers or want to quickly develop embedded solution based on standard AVR core, this board will help you quick start with the application by giving you access to everything required to run the Atmega16 microcontroller.With this board you can develop and prototype with any of Microchip's 40 pin AVR microcontrollers. . The board have User button and status LED.

Order Code : RDL/AMS/14/001/V1.0