LPC2148 is a single-chip 32-bit RISC Microcontroller with 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 32KB RAM having Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Two I2C serial interfaces, Two SPI serial interfaces Two 32-bit timers, Watchdog Timer, PWM unit, Real Time Clock with optional battery backup, Brown out detect circuit General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Order Code : RDL/LPC-48/14/001/V1.0

Indoor navigation is convenient for everyone, and it is especially indispensable for the visually impaired. We proposed such a navigation system for the visually impaired .LED lights emit visible light with location data and a embedded system or smartphone with a visible light receiver receives the data. The embedded system or smartphone calculates the optimal path to a designation and speaks to the visually impaired through a headphone.

ORDER CODE: RDL/DIY-LIFIPC/14/001/V1.0

Atmega 328 is one of the most commonly used Micro controllers with open source platform amongst many hobbyist and industrial communities. The simplicity and the low power of Atmega 328 helps design many prototype boards which could be used in numerous applications.

Order Code : RDL/RR3/14/001/V1.0

Irrigation system is critical in the development of agriculture of every country. It has been established that efficient irrigation processes has the potential of literally doubling the amount of food a farm processes.

ORDER CODE: RDL/DIY-GARUN/14/001/V1.0

Cloud Starter DIY Kit- UNO ATMEGA328

In Machine-to-Machine (M2M) applications, the ability to remotely monitor, collect, store and visualize data is paramount. Clients today have the choice to build out their own back-end server system and associated software elements, or look to a cloud-based system where much of the solution has been provided. Which solution is best depends on many factors including core competency, complexity, capital investment, time to market and more. 

This simple board breaks out a female USB type B connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. The +5V and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. 

Order Code : RDL/UBB/14/001/V1.0

This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface so if your microcontroller is working on 3V you can use this board readily. The interface board provided is for microcontrollers running at 3V.

Order Code : RDL/SDBB/14/001/V1.0