Popular Products

It is widely used in electronic,instrumentation,automation,communications,power supply units,student projetcs,amplifiers,medical and wellness devices,test and measurement equipment,industrial control,pheripheral devices and intrfaces, switch boxes.

ORDER CODE:RDL719

Power line communication refers to the concept of the transmitting information using the main

power line as communication channel. The Greatest benefit of the power line communication systems is that they use existing power lines as communication medium instead of using costly wireless equipment or dedicated communication wiring and hardware. This provides a strong motivation to use an existing power lines for communication purposes in addition to their use for power distribution thereby, taking advantage of already existing electrical network that is present in almost any building, whether industrial,commercial or residential.

LPC2148 is a single-chip 32-bit RISC Microcontroller with 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 32KB RAM having Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface.

ORDER CODE: RDL784

The project aims at designing Home automation system using Wi-Fi technology,you can start with one room or automate the entire house.The system offers one-touch control of lights and appliances.

ORDER CODE: RDL760

With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware.. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

Order Code : RDL/PIC-GB/13/001/V1.0

The IO Expander Board is based on the Microchip MCP23017 Expander Chip. This high-performance IC, allows connection to a range of High-Speed I²C buses, including the standard 100kHz bus, as well as the newer 400kHz and 1.7MHz bus standards. 

ORDER CODE: RDL637

The board has only one SSR driven by TTL circuit . The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control SSR. Each SSR can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of SSR is indicated by LED.

ORDER CODE: RDL686