Popular Products

The DIY KIT works on the concept of Bluetooth android remote control application, these command so received from any android phone can control robot movement.

As per the commands sent from the sender’s mobile, the microcontroller will send signals the movement of the robot.

ORDER CODE: RDL/DIY-ACBUN/14/001/V1.0

This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface.

Order Code : RDL/SDBB5V/14/001/V1.0

3 Pin RMC Connector Breakout Board

ORDER CODE: RDL778

It provides high quality recording and playback with 11 Minutes audio at 8 Khz Sampling rate with 16 bit resolution. The aPR33A series C2.x is specially designed for simple key trigger, user can record and playback the message averagely for 1, 2, 4 or 8 voice message(s) by switch, It is suitable in simple interface or need to limit the length of single message.

Order Code : RDL/APR/13/001/V1.0

Indoor navigation is convenient for everyone, and it is especially indispensable for the visually impaired. We proposed such a navigation system for the visually impaired .LED lights emit visible light with location data and a embedded system or smartphone with a visible light receiver receives the data. The embedded system or smartphone calculates the optimal path to a designation and speaks to the visually impaired through a headphone.

ORDER CODE: RDL/DIY-LIFIAM/14/001/V1.0

One of the basic interfacing requirements for the hobbyists or electronics enthusiasts is I/P (keypad) and O/P (LCD display)  for proyotype applications. This shield uses minimum number I/O’s that is 2 bits(D0 and D1) for LCD data . 5 input key switches (Navigation keys), when it's activated serial data will be sent to pin  D0 by internal 2 line LCD controller. Each key has been pulled up to a different voltage level, so a different voltage will be generated every time a user selects a key. This voltage could be read by the analog pin of internal 2 line LCD controller on the board. Hence saves the no of I/O pins.  The backlight of the LCD could be controlled by setting PWM (Pin D10) by adding a few lines of code.

Order Code : RDL/LKS/14/001/V1.0

Power line communication refers to the concept of the transmitting information using the main

power line as communication channel. The Greatest benefit of the power line communication systems is that they use existing power lines as communication medium instead of using costly wireless equipment or dedicated communication wiring and hardware. This provides a strong motivation to use an existing power lines for communication purposes in addition to their use for power distribution thereby, taking advantage of already existing electrical network that is present in almost any building, whether industrial,commercial or residential.

ORDER CODE: RDL/DIY-PLCPC/14/001/V1.0