Popular Products

This double sided pinboard features one side of the patch is 16 pin -60 pin turn DIP, 0.5mm spacing and the other side is 32 pin,44PIN, 64 pin, pitch 0.8mm pitch.

Order Code : RDL/QFP/14/001/V1.0

Solid State Relays (SSR) are semiconductor equivalents of the electromechanical relay and can be used to control electrical loads without the use of moving parts. The  SSR switch  ON / OFF and  0-100% dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL811

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions.

ORDER CODE: RDL825

It is a 5mm diameter round head, 2 pin terminal for reliable connection, it can create bright red LED light.Ideal for color displays, indicators, diagnostic or analytical equipment and etc.

Order Code : RDL/RL5/13/001/V1.0

Compatible with all Cellular applications, Antenna used for GSM signal amplification. Customized cable length.Good appearance, Powerful magnetic, Dimensional accuracy, Long lasting life, Optimum insulation resistanceHigh gain, Lower VSWR, Signal stability

Order Code : RDL333

Arduino Xbee Adapter Development Board allows an Arduino board to communicate wirelessly using  Zigbee or BlueTooth.This shield is build up by two parts: Bluetooth and Xbee shield.This Bluetooth shield is a serial port Bluetooth module (Slave/Master) breakout board. you can directly stack on Arduino and use the UART port for Bluetooth communication.XBee Shield is an enhanced Zigbee XBee Series modules breakout board for Arduino, it can directly plug in with Arduino, and use any pin of the basic board to connect with the XBee module serial port.

 Order Code : RDL/AXD/13/001/V1.0

The board can be used in applications where dimming of 110-220V AC power is required like dimming of bulb or fan. The input can be analog signal from microcontroller working at 0-5V or 0-10V  which is isolated with the use of opto-couplers. 

ORDER CODE: RDL802