Bestsellers

USB 8 Channel Relay Board FT245RL is controlled by computer USB port. The USB Relay Board is with 8 SPDT relays rated up to 7A each. You may control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation. 

Order Code : RDL/8RB/14/001/V2.0

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions. 4-20mA Current Loop Transmitter a serial I2C bus interface. 4-20mA Current Loop Transmitters device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.

ORDER CODE: RDL625

2 Keys Keypad can be connected to any microcontroller or any interfacing kit directly. KEY is a small keypad designed to data entries for microcontroller board. The board has 4-pin header for 4-wire ribbon cable. By default the switch status would be pulled up, every time you press a key the corresponding switch header changes its state to the common header in the board.

Order Code : RDL/2SW/14/001/V1.0

USB2.0 cables provide transfer rates up to 480Mbps, and easily attach to any USB device. A to B cables are used to connect from your USB port on Hub, PC or Mac to your USB device such as printer or scanner.

Order Code : RDL/USBA2B/13/001/V1.0

The board uses BTA12-600B, Triac suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers.

Order Code : RDL/LDC/13/001/V1.0

These RFID cards comes with a range of about 12-15 cm and delivers the processed data very quickly and in a easy readable format. Our range matches with the prevailing requirements of the market and are installed with modern features.

 Order Code : RDL/RFC/13/001/V1.0

The board can be used in applications where dimming of 110-220V AC power is required like dimming of bulb or fan. The input can be analog signal from microcontroller working at 0-5V or 0-10V  which is isolated with the use of opto-couplers. 

ORDER CODE: RDL802