Features:

Inbuilt GPS module provides accurate location information.
It is enabled with GPS, GSM and GPRS technologies
GSM, uses GPRS to communicate with the server over IP networks.
Easy to integrate in all vehicles/remote assets standard 12V/5V options.
Track the vehicle/asset location as well as route on Google Maps in real time
Also provides nearest district and the distance from the nearest district information.
4 Channel 4-20mA current loop receiver.
12 channel 10 bit ADC/Digital I/O 5V max
Modbus/RS485 communication.
GSM GPRS M95 Modem communication.
Input Power Supply 12-36V (Optional).
Inbuilt power supply (Optional).
Inbuilt RTC enabled.
On board SD card socket.
Support upto 8 GB FAT .
Expandabel upto 16GB.
Standard FT232 usb intrface for real time Programming
Logged data will be store in .CSV format.
Watchdog timer enabled.
Supports Open source Aurdino IDE for custom application development.

M95 General Features


	Quad-band	850/ 900/ 1800/ 1900MHz
	GPRS Multi-slot Class	12, 1~12 configurable
	GPRS Mobile Station	Class B
	Compliant to GSM Phase 2/2+	Class 4 (2W @ 850/ 900 MHz) Class 1(1W @ 1800/1900MHz)
	Supply Voltage Range	3.3~4.6V 4.0V nominal
	Low Power Consumption	1.3mA @ DRX=5 1.2mA @ DRX=9
	Operation Temperature	-40 °C to +85 °C
	Dimensions	19.9 × 23.6 × 2.65mm
	Weight	Approx. 3.0g
	Control via AT commands	GSM 07.07 ,07.05 and other enhanced AT Commands

M95 Specifications for SMS via GSM /GPRS
	Point-to-point MO and MT
	SMS Cell Broadcast
	Text and PDU Mode

M95 Interfaces
	SIM/ USIM	3V/ 1.8V
	UART	2 Interfaces
	Analog Audio Chanel	2 Embedded Class-AB amplifier in one channel
	PCM
	RTC Backup
	Antenna Pad

ATMEGA2560 Features:

Microcontroller

Microcontroller	ATmega2560
Operating Voltage	5V
Input Voltage (recommended)	7-12V
Input Voltage (limit)	6-20V
Digital I/O Pins	54 (of which 15 provide PWM output)
Analog Input Pins	16
DC Current per I/O Pin	20 mA
DC Current for 3.3V Pin	50 mA
Flash Memory	256 KB of which 8 KB used by bootloader
SRAM	8 KB
EEPROM	4 KB
Clock Speed	16 MHz

GPS Receiver PA6E-CAM with GPS Antenna Features:

33 tracking/ 99 acquisition-channel GPS receiver.
Supports QZSS, SBAS(WAAS, EGNOS, MSAS, GAGAN*) ranging.
Ultra-High Sensitivity: -165dBm.
High Update Rate: up to 10Hz(: SBAS can only be enabled when update rate is equal or less than to 5Hz.).
12 multi-tone active interference canceller(Some features need special firmware or command programmed by customer please refer to “PMTK Command List”)
High accuracy 1-PPS timing support for Timing Applications (±10ns RMS jitter).
AGPS Support for Fast TTFF.

Applications: