Controlling appliances is a main part of automation. The main object  of  Home  automation  is  to  provide  a  wireless communication  link  of  home  appliances  to  the  remote  user. The  main  objective  of  this  work  is  to  make  such  a  system which  controls  the  home  appliances  remotely.  Here we have demonstrated a simple yet a sophisticated way to control home appliances via an Android phone. 

ORDER CODE: RDL/DIY-BATM/14/001/V1.0

The components of solar powered intelligent drip irrigation system are shown in Fig. Soil moisture sensor is used for real-time collection of crop root soil moisture content and converting it into a signal in the range of Voltage V; and the signal will transformed as knowledge of water requirement of crop. Soil moisture content at the root zone of different crops is collected by using the soil moisture sensor. The threshold limit for the water requirement for a particular crop has been feed to system which in turn controls the operation the control system. The power needed for the operation of the control system has been met with the use of a solar panel and the display will receive the control signal and display the data stored using the sensor from the field.

ORDER CODE: RDL/DIY-DIA/14/001/V1.0

Automatic meter reading, or AMR, is the technology of automatically collecting consumption, diagnostic, and status data from energy metering devices (electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. 

ORDER CODE: RDL/DIY-AMRAL/14/001/V1.0

In recent years, it has become a fantasy that the people put their lives in risk. More often, the people consume alcoholic drinks and drive the vehicles. There are more chances that the person can hit the vehicle to any obstacle approaching him in the opposite direction due to unconsciousness caused by drinking. Hence, we make a modest attempt to design and develop a simple, low cost alcohol detection android application using an independent microcontroller.

The main aim of this project is to design a system that can identify whether the person, driving the vehicle, is in complete conscious state or not. The designed and developed system is installed in the module confining microcontroller, alcohol sensor and Bluetooth module.

ORDER CODE: RDL/DIY-ADAAL/14/001/V1.0

Indoor navigation is convenient for everyone, and it is especially indispensable for the visually impaired. We proposed such a navigation system for the visually impaired .LED lights emit visible light with location data and a embedded system or smartphone with a visible light receiver receives the data. The embedded system or smartphone calculates the optimal path to a designation and speaks to the visually impaired through a headphone.

ORDER CODE: RDL/DIY-LIFIAT/14/001/V1.0

Irrigation system is critical in the development of agriculture of every country. It has been established that efficient irrigation processes has the potential of literally doubling the amount of food a farm processes.

Integrating modern technologies in irrigation management systems is one of the ways of enhancing the irrigation processes to optimize the use of water and electric power consumption.

The system however, depends on the timely application of the water required to meet the water needs of the crops and this is achieved by remote switching of water pump through SMS.

ORDER CODE:  RDL/DIY-GRAAT/14/001/V1.0

Power line communication refers to the concept of the transmitting information using the main

power line as communication channel. The Greatest benefit of the power line communication systems is that they use existing power lines as communication medium instead of using costly wireless equipment or dedicated communication wiring and hardware. This provides a strong motivation to use an existing power lines for communication purposes in addition to their use for power distribution thereby, taking advantage of already existing electrical network that is present in almost any building, whether industrial,commercial or residential.