Search results for 'Remote Power Management and Meter Reading System Based on ARM microprocesor'

The BC548 is a general purpose epitaxial silicon NPN bipolar junction transistor. It is used for amplification and switching purposes.The maximum DC current gain is 800. 

Order Code : RDL/TRB/13/001/V1.0

Burg Strip Male with Right Angled bent pins. Total of 40 PINs with standard 0.1 inch pitch. Can be broken easily into any number of pin groups.

Order Code : RDL/MBSR/13/001/V1.0

This is an IC base for 40 Pin IC's. This is used as a place holder for the 40 pin IC chips and is used in order to allow safe removal and insertion of IC chips because IC chips may become damaged from heat due to soldering.This base is very useful for your circuit because if your IC burns out you can easily change the IC without the need of desoldering. 

Order Code : RDL/IB4/13/001/v1.0 

DB9 ports are very common on most types of microcontroller, where they can be used to communicate with a PC or other serial devices.

Order Code : RDL/DBM/13/001/V1.0

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

Order Code : RDL/MHZC/13/001/V1.0

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

 Order Code : RDL/MHC/13/001/V1.0

A rectifier is an electrical device that converts alternating current(AC), which periodically reverses direction, to direct current(DC), which flows in only one direction.

Order Code : RDL/BRD/13/001/V1.0

Digital Soil Moisture Sensor is having triple output mode i.e., Digital output is simple; Analog output is more accurate and Serial output with exact readings. The sensor will detect the moisture of the soil i.e shortage of water contents in the soil and if the contents are low the module output will be high otherwise the out put will remain in neutral condition. This sensor can be used for the automation of the gardening etc.

 Order Code: RDL/SLM/13/001/V1.0

A relay can be used for controlling a high-voltage circuit with a low-voltage signal, as in some low voltage digital controls where we can control a larger output switching circuitry.

Order No : RDL/SRB/13/001/V1.0