Search results for 'mpq1 s 112d a control relay'

The WiFi SSR switch  ON / OFF and Dimming can be controlled from remotely using an android app or supporting wifi enabled devices.WiFi Dimmer SSR switch can be used control light, FAN, power socket, Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL621

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions. 4-20mA Current Loop Transmitter a serial I2C bus interface. 4-20mA Current Loop Transmitters device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.

ORDER CODE: RDL625

The  SSR switch  ON / OFF and  16 level Dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL628

The PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its own 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency.

ORDER CODE: RDL630

OEN 62-12-1AC HEAVY DUTY POWER RELAY

ORDER CODE: RDL635

This is an affordable and simple Arduino GSM and GPRS shield. Module M95 QUECTEL Modem.

ORDER CODE: RDL670

The  SSR switch  ON / OFF and  16 level Dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL677

PCA9685 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously. 

ORDER CODE: RDL682

The board has only one SSR driven by TTL circuit . The board works on 12V but the input signal can come directly from microcontroller output working at 5V to control SSR. Each SSR can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of SSR is indicated by LED.

ORDER CODE: RDL686