Search results for 'the'

Atmega 328 is one of the most commonly used Micro controllers with open source platform amongst many hobbyist and industrial communities. The simplicity and the low power of Atmega 328 helps design many prototype boards which could be used in numerous applications.

ORDER CODE: RDL658

ORDER CODE: RDL652

The IO Expander Board is based on the Microchip MCP23017 Expander Chip. This high-performance IC, allows connection to a range of High-Speed I²C buses, including the standard 100kHz bus, as well as the newer 400kHz and 1.7MHz bus standards. 

ORDER CODE: RDL637

The PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its own 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency.

ORDER CODE: RDL630

The  SSR switch  ON / OFF and  16 level Dimming can be controlled using controller , switches  and PLC logics .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL628

The I2C-DAC board is a 12-bit digital-to-analog converter device using I2C bus. There are no external components required. Only two signal lines SDA and SCL plus supply voltage and ground are required to be connected. This makes it perfect for embedded systems that require digital-to-analog converter.

ORDER CODE: RDL626

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions. 4-20mA Current Loop Transmitter a serial I2C bus interface. 4-20mA Current Loop Transmitters device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.

ORDER CODE: RDL625

The WiFi SSR switch  ON / OFF and Dimming can be controlled from remotely using an android app or supporting wifi enabled devices.WiFi Dimmer SSR switch can be used control light, FAN, power socket, Triac dimming enabled LED's and any other remote  ON / OFF  or dimming application.

ORDER CODE: RDL621

Interactive voice response (IVR) is a technology that allows a computer to interact with humans through the use of voice and DTMF tones input via keypad.In telecommunications, IVR allows customers to interact with a company’s host system via a telephone keypad or by speech recognition, after which they can service their own inquiries by following the IVR dialogue. IVR systems can respond with prerecorded or dynamically generated audio to further direct users on how to proceed.

ORDER CODE: RDL619