This is an IC base for 28 Pin IC's. This is used as a place holder for the 28 pin IC chips and is used in order to allow safe removal and insertion of IC chips because IC chips may become damaged from heat due to soldering.This base is very useful for your circuit because if your IC burns out you can easily change the IC without the need of desoldering. 

Order Code : RDL/28PB/13/001/V1.0

DB9 ports are very common on most types of microcontroller, where they can be used to communicate with a PC or other serial devices.

Order Code : RDL/DBF/13/001/V1.0

DB9 ports are very common on most types of microcontroller, where they can be used to communicate with a PC or other serial devices.

Order Code : RDL/DBFP/13/001/V1.0

DB9 ports are very common on most types of microcontroller, where they can be used to communicate with a PC or other serial devices.

Order Code : RDL/DBMP/13/001/V1.0

These RFID cards comes with a range of about 12-15 cm and delivers the processed data very quickly and in a easy readable format. Our range matches with the prevailing requirements of the market and are installed with modern features.

 Order Code : RDL/RFC/13/001/V1.0

This is an IC base for 14 Pin IC's. This base is very useful for  circuit because if  IC burns out , you can easily change the IC without the need of desoldering. 

Order Code : RDL/IB14/13/001/v1.0

This is an IC base for 18 Pin IC's. This base is very useful for your circuit because if your IC burns out you can easily change the IC without the need of desoldering. 

Order Code : RDL/IB18/13/001/v1.0

Tin/lead solders, also called soft solders, are commercially available with tin concentrations between 5% and 70% by weight. The greater the tin concentration, the greater the solder’s tensile and shear strengths. Solder Lead is commonly used for electrical soldering and in electrical/electronic work. It has lower melting point.

Order Code : RDL/SOLDERLEAD/13/001/V1.0

USB2.0 cables provide transfer rates up to 480Mbps, and easily attach to any USB device. A to B cables are used to connect from your USB port on Hub, PC or Mac to your USB device such as printer or scanner.

Order Code : RDL/USBA2B/13/001/V1.0