Search results for 'usb relay'

The board uses BTA12-600B, Triac suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers.

Order Code : RDL/LDC/13/001/V1.0

Few older devices use DB9 connectors, but most modern computers use USB  port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.

 Order Code : RDL/U2U/13/001/V1.0

The regulated power supply accepts unregulated intputs from 12V to 15V AC or DC and gives regulated output of 3.3V  5V and 12V suitable for  projects which needs precise voltage to work. The input can come from step down transformer. Since board has diode  bridge input polarity does not matter.All outputs are brought to screw terminal. There is also an unregulated output voltage to drive high current loads like relays and motors.

In the present IT age, we are in need of fully automated industrial system. To design of Data Acquisition System (DAS) and its control is a challenging part of any measurement, automation and control system applications. Advancement in technology is very well reflected and supported by changes in measurement and control instrumentation. To move to high-speed serial from Parallel bus architectures has become prevalent and among these Ethernet is the most preferred switched Serial bus, which is forward-looking and backward-compatible. Great stride have been made in promoting Ethernet use for industrial networks and factory automation. The Web based distributed measurement and control is slowly replacing parallel architectures due to its non-crate architecture which reduces complexities of cooling, maintenance etc for slow speed field processing. A new kind of expandable, distributed large I/O data acquisition system based on low cost microcontroller based electronic web server boards has been investigated and developed in this paper, whose hardware boards use 8-bit RISC processor with Ethernet controller . There is a great deal of benefits for process plants in adopting the Internet to control systems. Over the years, there has been constant increase in the development of industrial Automation through remote monitoring and diagnosis virtually. By surveying down the existing remote monitoring system used for process plant equipment, this system tends to focus on the recent trends and developments in the control of equipments and devices in the industries by remote monitoring through Internet. The Internet based automation is made possible by the use of Programmable Logic Controller (PLC), Supervisory Control and Data Acquisition (SCADA), Virtual Private Network (VPN) and other network elements.

Order Code : RDL/SCD/13/001/v1.0

Hand vein patterns are unique and universal. Vein pattern is used as biometric feature in recent years. But, it is not very much popular biometric system as compared to other systems like fingerprint, iris etc., because of the higher cost. For conventional algorithm, it is necessary to use high quality images, which demand high-priced collection devices. The two approaches for vein authentication are repeated line tracking and maximum curvature method. Currently we are working on maximum curvature method. Here we are putting forward the new approach for low cost hand dorsa vein pattern acquisition using low cost device and proposing an algorithm to extract features from these low quality images which are used for personal authentication. 

Order Code : RDL/PVA/13/001/V1.0 

Sensors are the hopeful device for precision agriculture. By forming wireless sensor network we can make good monitoring system in the paddy crop field area. This project proposed idea about monitoring the crop field area without man power. The fundamental concept of this project is to provide a highly enabled monitoring of crop field. In this all the different sensor values such as ph sensor, temperature sensor, moisture sensor sends value through gprs and the values are sensed and processed and if any of the sensor value exceeds the minimum or maximum value, a alarm is activated and the farmer gets a message on his phone and also a email message.

 Order Code : RDL/AGM/13/001/V1.0

 This programmer is based on USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware.8051 USB programmer supports 7 Atmel 8051 microcontrollers. It is a reliable tool for fast programming of 8051 devices.

Order Code : RDL/ATB/13/001/V1.0

USB2.0 cables provide transfer rates up to 480Mbps, and easily attach to any USB device. A to B cables are used to connect from your USB port on Hub, PC or Mac to your USB device such as printer or scanner.

Order Code : RDL/USBA2B/13/001/V1.0

The PICkit™ 2 Development Programmer/Debugger is a low-cost development tool with an easy to use interface for programming and debugging Microchip’s Flash families of microcontrollers

Order Code : RDL/PIK/13/001/V1.0