Search results for 'pcb board china'
-
Xbee USB Adapter with FT232RL shield works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.Plug the unit into the XBee shield, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.
Order Code : RDL/XUCA/13/001/V1.0
Learn More -
Xbee USB adapter provides easy way for mounting the xbee module and taking the external TTL connection(RX,TX,GND) can be connected to any microcontroller. Power supply can be given to the external or USB.
Order Code : RDL/XUC/13/001/V1.0
Learn More -
Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.
Order Code : RDL/BLC/13/001/V1.0
Learn More -
Few older devices use DB9 connectors, but most modern computers use USB port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.
Order Code : RDL/U2U/13/001/V1.0
Learn More -
Real Time Clock based on most popular RTC IC DS1307 which can maintain clock & calendar information. Life of 3V battery is 10 years which maintains accurate clock even without any external power. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The Interface to board is simple I2C with SCK and SDA pins which can be interfaced with any microcontroller easily.
Order Code : RDL/RTC/13/001/V1.0
Learn More -
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More