Search results for '4 RELAY BOARD'

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions. 4-20mA Current Loop Transmitter a serial I2C bus interface. 4-20mA Current Loop Transmitters device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.

ORDER CODE: RDL625

The XTR116 are precision current output converters are designed to transmit analog 4-to- 20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions.

ORDER CODE: RDL707

The MODBUS TCP gateway extends two way communications between the MODBUS RTU & the MODBUS TCP Network. The Gateway comes with Configuration manager that makes device configuration easier.

The MODBUS gateway fetches the Data from a variety of MODBUS Slaves- energy meters, Sensors, industrial PLC’s, and VFD through MODBUS RTU Protocol and then push to MODBUS TCP Scanner device.

ORDER CODE: RDL799

 ORDER CODE: RDL812

The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions.

ORDER CODE: RDL825

RDL Industrial Data Logger is a comprehensive real-time industrial automation tool. This Data Logger is designed to seamlessly integrate with the IoT and Analytical processing systems. 

Industrial Data Logger supports multiple I/O options, and interfaces data logger is a perfect fit to build custom automation solutions.

ORDER CODE: RDL828

Take a Look at the Updated Version Here

Industrial Data Logger 4G LTE

Industrial Data Logger 2G GPRS

The Serial RS232 to Ethernet/WiFi gateway extends two way communications between serial terminal host & TCP Network. The Gateway comes with a Configuration manager that makes device configuration easier.
The serial Ethernet / WiFi gateway fetches the Data from a serial terminal host using Open Data method & then pushes to the TCP Scanner device and vice versa.

ORDER CODE:RDL849