Search results for 'mpq1 s 112d a control relay'
-
Plastic enclosure for electronics 127*83*37 mm 5*3.27*1.46 inch abs material light grey color.
ORDER CODE: RDL/PEE/15/001/V1.0
Learn More -
This double sided pinboard features one side of the patch is 32 pin -100 pin turn DIP, 0.5mm spacing and the other side is 32 pin -64 pin, pitch 0.8mm pitch.
Order Code: RDL/TQFP/15/001/V1.0
Learn More -
This double sided pinboard features one side of the patch is 32 pin -64 pin turn DIP, 0.8mm spacing and the other side is 32 pin-100PIN pitch 0.5mm pitch.
ORDER CODE: RDL/QFP/15/001/V1.0
Learn More -
This adapters allow you to quickly and easily mount a USB Type A Female connector onto a breadboard or prototype boards. This breakout board brings all 4 pins of its USB Type A Female socket out to prototyping work.Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits.
Order Code : RDL/UBA/14/001/V1.0
Learn More -
This adapters allow you to quickly and easily mount a RJ45 connector onto a breadboard or prototype boards. This breakout board brings all 8 pins of its RJ45 socket out to prototyping work. Each pin brought to the male header pins. There are some prototyping area with 0.1" (2.54mm) spacing, allowing easy addition of simple circuits.
Order Code : RDL/RJ45/14/001/V1.0
Learn More -
This adapter allows you to connect a 2.5 mm barrel jack connector to bare wires. One end has 3 pin screw terminals . If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.
Order Code : RDL/DSB/14/001/V1.0
Learn More -
-
-
-
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More