Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.

Order Code : RDL/BLC/13/001/V1.0

The AT24CXX EEPROM Board is a storage tool for EEPROM with I2C interface, It is a non-volatile memory module.

Order Code : RDL/EEP/14/001/V1.0

4 Channel Opto-Isolated Board is a 4 channel opto-isolator board assembly that allows microcontroller and other logic circuits to be interfaced to both input and output signals that require opto-isolation.This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. 

 Order Code : RDL/OPT/13/001/V1.0

The regulated power supply accepts unregulated intputs from 12V to 15V AC or DC and gives regulated output of 3.3V  5V and 12V suitable for  projects which needs precise voltage to work. The input can come from step down transformer. Since board has diode  bridge input polarity does not matter.All outputs are brought to screw terminal. There is also an unregulated output voltage to drive high current loads like relays and motors.

LCD stands for Liquid Crystal Display. LCD is finding wide spread use replacing LEDs (seven segment LEDs or other multi segment LEDs) because of the the ability to display numbers, characters and graphics. This is in contrast to LEDs, which are limited to numbers and a few characters.

Order Code : RDL/LCD/13/001/V1.0

3 Pin RMC Connector Breakout Board

ORDER CODE: RDL778

PCA9685 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously. 

ORDER CODE: RDL682

Instrument housing case pcb enclosure 36*147*100mm project box electronic case amplifier enclosure distribution box.

ORDER CODE: RDL/IHC/15/001/V1.0

Processing Days: 10-15 Days

Plastic housing for PCB abs plastic enclosure  130*80*25mm diy electronic plastic housing enclosure box instrument box.