Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0

This is Eight  Channel relay board controlled by Serially. The Serial relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Order Code : RDL/8RB-S/14/001/V1.0

This is Eight  Channel relay board controlled through RS485 protocol. The RS485 relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Order Code : RDL/8RB-R/14/001/V1.0

This adapter allows you to connect a 2.5 mm barrel jack connector to bare wires. One end has 3 pin screw terminals . If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

Order Code : RDL/DSB/14/001/V1.0

This is Eight  Channel relay board controlled through WiFi. The WiFi relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

Order Code :  RDL/8RLY-WiFi/14/001/V1.0

Plastic enclosure for electronics 127*83*37 mm 5*3.27*1.46 inch abs material light grey color.

ORDER CODE: RDL/PEE/15/001/V1.0

Plastic handheld enclosure 203*100*35mm plastic enclosure for electronics, electronic plastic box.

ORDER CODE:RDL/PHE/15/001/V1.0

Processing Days: 10-15 Working Days.

Plastic box case electronic project box for Diy housing (1 pcs)120*120*25mm electronics enclosures for pcb outlet enclosure.

ORDER CODE: RDL/EPB/15/001/V1.0

Processing Days: 10-15 Days

Small abs box 40*17*10mm diy plastic case electrical plastic box distribution project box.