Search results for 'usb to uart converter'

Arduino Li-Fi Shield is a plug-and-play evaluation board for developing a wide array of visible light communication applications in consumer, wearable, industrial, medical and Internet of Things (IoT). Arduino Li-Fi Shield transfers data from one source to another through visible light without the flickering effect. Technically, 1‟s (LED on) and 0‟s (LED off) are modulated and then transmitted at very high speed.

ORDER CODE: RDL657

Control anything anywhere any time. Save power. Eliminate service calls. Switch routers, servers, lighting, even industrial machinery via the web and App. Customize the web server with your own using RDL IoT SDK. Each relay can switch AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and any electrical equipment.

ORDER CODE: RDL5100

Control anything anywhere any time. Save power. Eliminate service calls. Switch routers, servers, lighting, even industrial machinery via the web and App. Customize the web server with your own using RDL IoT SDK. Each relay can switch AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and any electrical equipment.

ORDER CODE: RDL775

This is 20 Channel relay board controlled through WiFi. The WiFi relay board is with 20 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 20) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

ORDER CODE: RDL701

RDL WiFi Eight Channel Relay Board is controlled through WiFi. The WiFi relay board is with 8 SPDT relays rated up to 7A each. You can control devices 230V / 120V (up to 8) directly with one such relay unit. Suitable for home automation applications, hobby projects, industrial automation.

ORDER CODE: RDL665

The I2C-DAC board is a 12-bit digital-to-analog converter device using I2C bus. There are no external components required. Only two signal lines SDA and SCL plus supply voltage and ground are required to be connected. This makes it perfect for embedded systems that require digital-to-analog converter.

ORDER CODE: RDL626

This double sided pinboard features one side of the patch is 32 pin -64 pin turn DIP, 0.8mm spacing and the other side is 32 pin-100PIN pitch 0.5mm pitch.

ORDER CODE: RDL/QFP/15/001/V1.0

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

Order Code : RDL/8BLC/14/001/V1.0