Search results for 'как получить информацию Electro voice по qr коду'

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

 Order Code : RDL/MHC/13/001/V1.0

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating  crystal of piezoelectric material to create an electrical signal with a very precise  frequency.

Order Code : RDL/MHZC/13/001/V1.0

Pull-up resistors are used in electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels, if external devices are disconnected or high-impedance is introduced. They may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.A pull-up resistor weakly "pulls" the voltage of the wire it is connected to towards its voltage source level when the other components on the line are inactive.

Order Code : RDL/PUR/13/001/V1.0

 A diode is a two-terminal electronic component with asymmetric conductance; it has low  resistance to current in one direction, and high  resistance in the other direction.

Order Code : RDL/DIN/13/001/V1.0

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and at the same time, act to lower voltage levels within circuits. In electronic circuits resistors are used to limit current flow, to adjust signal levels, bias active elements, terminate transmission lines among other uses.

Order Code : RDL/RES/13/001/V1.0

A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field.

Order Code : RDL/CAP/13/001/V1.0

A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field.An electrolytic capacitor is a capacitor that uses an electrolyte (an ionic conducting liquid) as one of its plates to achieve a larger capacitance per unit 

Order Code : RDL/CAPE/13/001/V1.0

Pull-up resistors are used in electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels, if external devices are disconnected or high-impedance is introduced. They may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.A pull-up resistor weakly "pulls" the voltage of the wire it is connected to towards its voltage source level when the other components on the line are inactive.

Order Code : RDL/PUR1K/13/001/V1.0

Tin/lead solders, also called soft solders, are commercially available with tin concentrations between 5% and 70% by weight. The greater the tin concentration, the greater the solder’s tensile and shear strengths. Solder Lead is commonly used for electrical soldering and in electrical/electronic work. It has lower melting point.

Order Code : RDL/SOLDERLEAD/13/001/V1.0