Toll-Free Customer Support 24/7

Search results for '4 RELAY BOARD'

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8
  1. The board uses BTA12-600B, Triac suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers.

    Order Code : RDL/LDC/13/001/V1.0

    Learn More
  2. Few older devices use DB9 connectors, but most modern computers use USB  port for data transfer. By using a USB to serial adapter, you can continue to use your older serial-enabled device through your new computer's USB port.

     Order Code : RDL/U2U/13/001/V1.0

     

    Learn More
  3. 4 Channel Opto-Isolated Board is a 4 channel opto-isolator board assembly that allows microcontroller and other logic circuits to be interfaced to both input and output signals that require opto-isolation.This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. 

     Order Code : RDL/OPT/13/001/V1.0

    Learn More
  4. The AT24CXX EEPROM Board is a storage tool for EEPROM with I2C interface, It is a non-volatile memory module.

    Order Code : RDL/EEP/14/001/V1.0

    Learn More
  5. Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin.

    Order Code : RDL/BLC/13/001/V1.0

    Learn More
  6. Xbee USB adapter provides easy way for mounting the xbee module and taking the external TTL connection(RX,TX,GND) can be connected to any microcontroller. Power supply can be given to the external or USB.

     Order Code : RDL/XUC/13/001/V1.0

    Learn More
  7. Xbee USB Adapter with FT232RL  shield works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.Plug the unit into the XBee shield, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.

     Order Code : RDL/XUCA/13/001/V1.0

    Learn More
  8. ₹17,999.00

    LiFi Visible Light Technology is a very innovative technology known as 'LiFi' or 'Light Fidelity’ or VLC (visible light communication), which transfer the data through the light as a medium.

    Order Code: RDL/LIFI/13/001/V1.0

    Take a Look at the Updated Version of LiFi Here

    Learn More
  9. This is a wonderful little SD card interface module. It is easily interfaced as a peripheral to your module. Through programming, you can read and write to the SD card.All SD Card works on 3V interface so if your microcontroller is working on 3V you can use this board readily. The interface board provided is for microcontrollers running at 3V.

    Order Code : RDL/SDBB/14/001/V1.0

    Learn More
  10. This double sided pinboard features one side of the patch is 16 pin -60 pin turn DIP, 0.5mm spacing and the other side is 32 pin,44PIN, 64 pin, pitch 0.8mm pitch.

    Order Code : RDL/TQFP/14/001/V1.0

    Learn More

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8

Back to top