Search results for 'jumper wire'
-
This is a cost effective and simple Arduino GSM and GPRS shield. Module SIM800C Modem is being used.
ORDER CODE: RDL808
Learn More -
LiFi Nano v2 is an easy-to-use, plug-and-play evaluation platform for a wide array of visible light communication applications in consumer, wearables, industrial, medical and Internet of Things (IoT) markets.LiFi Nano consists of two modules, LiFi transmit module connected to the lighting LED and LiFi receive module connected to the host communicating system
ORDER CODE: RDL749
Learn More -
The XTR116 are precision current output converters are designed to transmit analog 4-to- 20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions.
ORDER CODE: RDL707
Learn More -
PCA9685 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously.
ORDER CODE: RDL682
Learn More -
This is an affordable and simple Arduino GSM and GPRS shield. Module M95 QUECTEL Modem.
ORDER CODE: RDL670
Learn More -
The XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop. They provide accurate current scaling and output current limit functions. 4-20mA Current Loop Transmitter a serial I2C bus interface. 4-20mA Current Loop Transmitters device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
ORDER CODE: RDL625
Learn More -
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
Order Code : RDL/8BLC/14/001/V1.0
Learn More -
LiFi Visible Light Technology is a very innovative technology known as 'LiFi' or 'Light Fidelity’ or VLC (visible light communication), which transfer the data through the light as a medium.
Order Code: RDL/LIFI/13/001/V1.0
Take a Look at the Updated Version of LiFi Here
Learn More -
Li-Fi is a plug-and-play evaluation board for developing a wide array of visible light communication applications in consumer, wearable, industrial, medical and Internet of Things (IoT). Li-Fi transfers data from one source to another through visible light without the flickering effect. Technically, 1‟s (LED on) and 0‟s (LED off) are modulated and then transmitted at a very high speed.
ORDER CODE: RDL864
Learn More -
8 Channel Temperature Data Logger is a perfect fit to build custom Industrial,Laboratory,PHARMA & CALIBRATION process monitoring and control systems
ORDER CODE :RDL859
Learn More